|
Secondhand Laser offers
Processing Systems with Solid-State Lasers
Nd:YAG-Laser Cutting- and Welding System with Raytheon SS521C-A1, Nd:YAG-laser with 250W nominal power (average), max. pulse energy 25 Joule, max. repeatability frequency 200 Hz, pulse length 0,2 – 6 ms. XY-cross table with 250 x 250 mm working range, DC-servo motors, Heidenhain linear measuring rules, swiveling axis, Anorad ANOMATIC II CNC-control, Joy stick, focusing optics with gas nozzle (lens defect) in working position, adjustment microscope with TV-camera and monitor, mounted over an equipping station. System can be used for welding and cutting of metals. Mfrd. 1981, 16000 operating hours, sale on ”as seen” condition, without function guarantee. Price ex Vienna, unpacked
Price: 9.000,00 €
Precision fine processing system, consisting of Baasel BLS 700 pulsed TEM00 Nd:YAG-laser on granite block, with KTP-frequency doubler, 2 intracavity diaphragms, 3x beam expander telescope with pin hole, Pockels cells Q-switch, polarisator. Resonator length 1200 mm. Max. average power at 532 nm 400 mW. Pulse rate 0.300 Hz, pulse duration 150 ns, max. pulse energy 5 mJ. Föhrenbach precision XY-table with DC-motors, 25 x 25 mm travel range, Heidenhain glass measuring rules, resolution 0,1 µm. Fine cutting focusing optics with 10x objective, focal length 6 mm, focus spot width 10 µm. Binocular, video camera with monitor. System and laser head on granite plate with vibration dampening. Philips CNC 3460 2-axes control with Aerotech servo amplifiers. Mfrd. 1985, 3700 hours, used in lab, not tested. Price ex location
Price: 10.000,00 €
Precision Fine Processing System, with Baasel BLS 611 TEM00 Nd:YAG-laser on granite slab, with LiJ03-frequency doubler, Q-switch 1 – 50 kHz. Max. power 600 mW at 5 kHz, max. pulse peak power 2 kW at 5 kHz, max. pulse energy 0,2 mJ, pulse width 100 ns. 2 intracavity diaphragms, 3x beam expander with pin hole, resonator length 1000 mm. Fine cutting focusing optics with 10x objective, focal length 6 mm, focus spot width 10 µm. Binocular, video camera with monitor. Föhrenbach precision XY-table DC- motors, travel range 25 x 25 mm, Heidenhain glass measuring rules, resolution 0,1 µm. System and laser head on granite plate with vibration dampening. Philips CNC 5460 6-axes control with Aerotech servo amplifiers (2 axes). Mfrd. 86, 18000 hrs, used in lab, not tested. Price ex location
Price: 10.000,00 €
Laser System for Fine Cutting consisting of Lasag SLAB PR15 TEM00 Nd:YAG-laser, max. average power 15 W TEM00, pulsable up to 300 Hz, min. pulse width 0,1 ms, max. single pulse energy 1 J. Working station on granite slab with XY-table of 400 x 400 mm travel, equipped with optical scales, positional accuracy better than ±0,01 mm. Fanuc AC-Servo motors and servo drives. Lasag focusing head with monocular viewing, cutting nozzle for gas assist cutting. Motorized Z-axis. Fanuc 3-axes CNC-control. Manufacturing year 1994, refurbished, good condition. Price ex location
Price: 35.000,00 €
Processing System with JK Lumonics MS 820 LD cutting- and welding Nd:YAG-laser, max. power 200 W, max. pulse energy 35 J, pulse rate 1 – 200 pps, pulse durance 0,5 – 20 ms. Beam expanding telescope, additional resonator mirror for fine cutting (LD), HeNe- pilot laser, focusing with gas nozzle, binocular viewing and TV camera. Laser head integrated into heavy support with CNC-controlled XY-table, working range 100 x 140 mm, tiltable rotating axis, Shielded work chamber with sliding doors.CNC-control Micro Control. Mfrd. 1984, partly overhauled, good condition. Price ex location
Price: 15.000,00 €
Lasag LPM 300 universal laser processing system, consisting of KLS 321 Nd: YAG-laser; nominal power up to 260 W, pulsable until 300 Hz, pulse length 0,2-20 ms, max. pulse power 12kW, max. pulse energy 50J, motorized beam expander, energy detector, beam absorber, shutter, focusing optics LaK 301 with deflection mirror, beam splitter, focus adjustment, lens 100mm FL with protective glass, gas nozzle for cutting and welding, binocular for observing, illumination. XY-table with 220x230 mm cutting range, rotating table, Z-axis 320mm, CNC-control NUM 1060 with 3 axes. Housing with sliding door and protective glass. Mfrd. 1986, laser supply unit and NUM CNC-control mfrd. 2005. Regularly serviced, very good condition. (1L4E2D) Price ex location
Price: 40.000,00 €
Rofin Baasel SWP 5002 Star Weld Performance Manual Welding laser system,
Nd: YAG-laser 50 W, then, max. pulse energy 80J, max. pulse peak power 8,5 kw, pulse length 0,5-50 ms, pulse frequency 0-10 Hz. Electrical input 230V/16A/1,7 kW. Stereo microscope viewing with cross hair, display, 50 memories for welding parameters, working chamber class 1, housing on wheels, fume exhaust fan with filter, mfrd. 2001, factory overhaul 2010, unused since mince condition, manufacturer warranty.(7L1F6D).
Price: 17.000,00 €
ACLAS LS 2 Cutting System with pulsed Rofin Sinar RSY 300 P Nd: YAG-Laser, nominal power 300 W, working area 1000 x 600 mm, Lasag SBK 150 cutting head, tactile height control, clamp system, Heidenhain TNC 360 +TNC UPG CNC-control. Cutting performance: steel/inox 0,1-2,5 mm, aluminium 0,1-2,0 mm, brass 0,1-0,5mm. Mfrd. 1993, operational system (2I1M7R).
Price: 20.000,00 €
DML Deckel Maho Lasertec-Sauer 80 Fine Cutting 2D/3D-Precision Processing System with Solid stae laser for fine cutting, drilling and welding. Nd: YAG-laser Laser FLS, nominal power 300 W, working range 2D: 500x 800 mm with linear motor drives. 3D: with rotation and tilt axis, incl. chuck, Z-axis 700 mm. Focussing with LASAG BAK 4 standard focussing head, alternative with Precitec cutting head and capacitive distance control. Monocular beam viewing with camera. Closed working cabinet with protective windows. siemens 840 D CNC-control. Water chiller, fume filter. Mfrd. 2006, demo machine with 3000 operating hours, Laser 362 hrs. List price 2006 (€ 400.000,-), excellent condition. Can be demonstrated. (4K1S1D). Price incl. dismantling € 185.000,-. Existing leasing contract and PEPS 3D-Software licence can be taken over.
Price: 185.000,00 €
|
